Glossary.From abbreviation to plain English.
The electronics industry loves abbreviations. Three letters, and everyone around the table nods. That works fine between two engineers – and less well if you are on the outside trying to work out what we actually do. Here is the translation.
The ones weuse about ourselves
- EMS Electronics Manufacturing Services
-
We build electronics for other companies. You have the product and the drawings. We have the machines, the people and the responsibility for getting it right.
That is the whole company, in three letters.
- Board / PCB
-
The flat board inside your devices – often green – with thin copper tracks on it. The tracks are the wires. The components are soldered on top.
It is green because the lacquer is green. There is no deeper reason.
- PCB / PCBA Printed Circuit Board / Printed Circuit Board Assembly
-
PCB is the empty board. PCBA is the same board once the components are on it. One letter apart – and most of our work sits in that letter.
- SMT Surface Mount Technology
-
Mounting on the surface. A machine places the components directly on top of the board, and they are soldered in an oven. This is how almost all modern electronics are assembled.
Everything in your pocket right now was made this way.
- THT Through-Hole Technology
-
Hand assembly. The component has legs that go through holes in the board and are soldered on the other side. It makes a mechanically stronger joint.
The old-fashioned way. It is not outdated – it just holds better.
- Box build
-
When we do not just make the board but assemble the whole product: enclosure, cables, display, screws. You get something that can be boxed and shipped to your customer.
- OEM / ODM Original Equipment Manufacturer / Original Design Manufacturer
-
Two ways of dividing the work. With OEM the customer has designed the product and we build it. With ODM the manufacturer designs it as well. We build to the customer’s drawing.
- Turnkey and consignment
-
Who buys the components. With turnkey we buy them and carry the responsibility that they arrive on time. With consignment the customer sends them. The difference shows in the price, and more clearly still when a component suddenly cannot be sourced.
- Wave soldering
-
A machine passes the board over a wave of molten solder, and all the through-hole components are soldered at once. It is the old method, and it is still the right one for many boards.
It looks exactly like what it is called: a wave.
- Selective soldering
-
Wave soldering, but one spot at a time. A nozzle follows a program and solders exactly the pins that need it, leaving the rest alone. Used when something on the board cannot be dipped.
The ones aboutquality
- AOI Automated Optical Inspection
-
A camera photographs every single board and compares it with how it should look. If a component sits crooked or is missing, the board is pulled out.
A pair of eyes that never get tired and never look away.
- SPI Solder Paste Inspection
-
A check of the solder paste before the components go on. If there is too little or too much, we catch it now rather than at the end.
Most soldering defects are decided here, long before anything is soldered.
- BGA Ball Grid Array
-
A chip with no legs out to the sides, but hundreds of tiny solder balls underneath. Once it is mounted, you cannot see a single one of the joints.
Which is why we have an X-ray machine.
- X-ray
-
The same idea as at the hospital, only on electronics. We look through the component and see the joints underneath that cannot be seen from the outside.
- IPC-A-610
-
The world’s most widely used standard for when a solder joint is good enough. Class 2 is ordinary electronics. Class 3 is for what must not fail – and it costs more, because the requirements are tougher.
We ask which class your product needs. Not which one costs the most.
- Traceability
-
We can look up which components are in exactly your unit, when it was produced and who was at the line. It matters if something starts playing up years later.
- EMC Electromagnetic Compatibility
-
Whether a device can cope with interference from other devices and refrain from causing any itself. It is a legal requirement in the EU, and it is the reason for the metal shields and small components on a board whose purpose is otherwise hard to see.
It is why a speaker crackles just before the phone rings.
- ESD Electrostatic Discharge
-
Static electricity. The small shock you get from a door handle is enough to destroy a component, often without any visible sign. That is why floors, benches, chairs and coats in production are conductive, and everyone is earthed at the wrist.
The component does not always die at once. It dies at the user’s, six months later.
- RoHS Restriction of Hazardous Substances
-
The EU rules for which substances may be present in electronics. Lead is the best known. It is why solder is lead-free today, and why it has to be soldered hotter than before.
- FAI First Article Inspection
-
The first finished unit is measured all the way through before the rest is started. If it is wrong, it is one board that is wrong, not a thousand.
- ICT In-Circuit Test
-
Testing the finished board by setting small probes down on specific points and measuring. It finds the faults a camera cannot see: a component of the right size but the wrong value.
The ones you meetwhen we get started
- Bill of materials also called BOM, Bill of Materials
-
The list of every component that goes on your board – which ones, how many and where they are bought.
A spreadsheet. A very important spreadsheet.
- Gerber
-
The file format your board is drawn in. It is the first thing we ask for – these files describe how the copper tracks run.
Named after the company that invented it in the 1960s. Nobody has agreed on anything better since.
- Manufacturability review also called DFM, Design for Manufacturability
-
We read your design through before any money is spent, and tell you if something will be difficult, expensive or fragile to produce.
That conversation is cheaper than the one you would otherwise have later.
- NPI New Product Introduction
-
The journey from “it works on the desk” to “it can be produced a thousand times in a row and they are all the same”. That is where most surprises hide.
- Confidentiality agreement also called an NDA, Non-Disclosure Agreement
-
An agreement that we will not tell anyone what you are working on. We are happy to sign before you send us anything at all.
We know a good deal that we do not repeat.
- FAT Factory Acceptance Test
-
The customer’s own approval before the goods leave the factory. We agree beforehand what has to work, and we try it together. If you accept it, it is accepted.
- MOQ Minimum Order Quantity
-
The smallest number a component can be bought in. If you need twelve of something sold on reels of five thousand, the unit price is not what decides the sum.
- EOL End of Life
-
When a component is no longer made. It happens constantly, and it hits products that have run well for ten years. The answer is either to buy stock in time or to redesign.
It is rarely the component that is expensive. It is the redesign.
- MSL Moisture Sensitivity Level
-
How much moisture a component may take up before it is soldered. Some must be kept in a dry cabinet and used within a set number of hours once the bag is opened. Otherwise the moisture inside boils when it meets the oven.
The term for it is popcorning. It sounds friendlier than it is.
The ones that justsound strange
- Pick-and-place
-
The machine that picks the components up and puts them on the board. It places several thousand an hour, and it hits every time.
- Reflow
-
The oven. The board runs through on a carefully controlled temperature curve, the solder paste melts, and every component is fixed at once.
The curve differs from board to board. That is one of the things experience is good for.
- Conformal coating
-
A thin lacquer over the finished board so moisture, salt and dust cannot get in. Used for electronics that sit outdoors, at sea or inside a machine.
- Rework
-
Taking a component off again and putting a new one on – on a board that is already finished. It takes a steady hand and the right equipment.
- Depaneling
-
Boards are produced several at a time on one large panel. Depaneling is separating them afterwards – here with a laser, so no stress is put into the material.
- 01005
-
A component size: 0.4 × 0.2 millimetres. Smaller than a pinhead, and smaller than most people think you can work with.
We have built a board with 18 components that fits in the hole of a Danish two-krone coin.
- Stencil
-
A thin metal sheet with openings exactly where the solder paste belongs. The paste is swept across, the sheet is lifted, and a small deposit is left on every pad, ready for the component.
- Via
-
A small hole through the board that connects the tracks on top with the tracks underneath. A board often has more than two layers, and holes like these are what hold them together.
- Tombstoning
-
When a small component stands up on one end during soldering, like a gravestone. It happens when the solder melts a fraction earlier on one side than the other and pulls the component up.
The name is not pretty, but it is precise.
- Voids
-
Air bubbles inside a solder joint. Small ones are almost always there and do no harm. Large ones conduct heat poorly and can crack over time. They can only be seen with X-ray.
The ones fromthe next desk – development, not manufacturing
- Embedded software
-
The program inside the product. It sits in a small chip on the board and starts when power is applied. The developer writes it, not us, but we load it once the board is finished.
- NB-IoT Narrowband Internet of Things
-
A mobile connection built for devices that send very little data very rarely, such as a water meter or a parking sensor. It uses so little power that a battery can last for years.
- R&D Research and Development
-
Development. The work of deciding what the product has to do and drawing it. It comes before our part and is done by the customer or by a design house.
Missing a word? Write to us and we will add it.
Send us your files.We come back with questions and a price.
Drawings, a parts list and a short description are enough to get started. Everything you send is treated confidentially – and we are happy to sign a confidentiality agreement first.